few questions with sonata and nf7-s

[Owskie]

OK im basically all set up
few problems
I have two Cables coming from the front
1.one is a male the other is a female ( both white) connected to gether (wires) , i connected the male to a power supply thingy
i have nothing to plug the female one into, because all the fans are using what that would go into

2. i have no idea if my jumpers are facing the right direction
3. the audio thing going from the mobo to my cd rom drive , RGGL? wtf?
nooo clue if thats set up right at all
4. I have two power cord thingies, that have a really small 4 four pin thing, i attacted one to my floppy... i hope that was right.

any info is appreciated

 

[Asus]

And you are putting your own PC together?
Scary.

You seem to be set...
2 front cables...male and female.
Please explain...

Are they usb and firewire? Is one a molex power connector? (same as the ones in your harddrive/cdrom)

jumpers...you mean power/reset/harddrive led/power led...
for the LEDs, if they come on...then you have it right.

well...you really dont need the "audio thing going from teh mobo to my cd rom drive" as it allows you to play audio cds with out using the CPU. dont need it but if you play audio cds...then go ahead.

yes the small mini molex (4 pins) goes to the floppy.

 

[Owskie]

two molex things, one male one female, i had no plugs for the females so i plugged male in
its on the same wire
its going to front bezel

 

[Asus]

front fan?
btw they give you two plugs only so you dont use up all of your molex connectors from teh power supply.
You just use one or you can string molex together.
e.g. plug one end into a harddrive and the other to the molex from the powersupply and it will power both the fan and the harddrive.

 

[Owskie]

i got it figured out
i could have used either the female or the male
it was for front led's