ComradeBadger
Tank
- Joined
- May 15, 2003
- Messages
- 1,723
- Reaction score
- 2
Right, I have a watercooling system installed on a Pentium 4 CPU. It's a fairly decent one, does the job.
I previously had the computer in a very good, stable, cold enviroment (my flat in Lincoln) and suffered no problems (it was overclocked by 200mHz, to 3.0 GHz
I've moved it back to my parents house as I am home for easter (I'm staying in my old room, above the boiler, in a small room, which generally heats up fast)
I left the computer on all night one night, and most of the day. While I was working it reached shutdown threshold (somewhere near 100 Degrees C) and shut down.
I turned it on when I got back, and it heated up amazingly fast - I turned it off, I left it off for 30mins, checked the copper block to see if it had cooled down - it had. Downclocked it to 2.2GHz, Turned it back on, heated up to shutdown threshold within minutes. It still did it after an hour of being left to it's own devices
Anyone got any ideas?
EDIT: I currently believe it's due to the fluid in the pipes not having cooled down enough. I'll leave it off for a long time, let it really cool down. Perhaps even bleed the system a bit too.
- Any other ideas to prevent this seemingly travel-caused problem?
I previously had the computer in a very good, stable, cold enviroment (my flat in Lincoln) and suffered no problems (it was overclocked by 200mHz, to 3.0 GHz
I've moved it back to my parents house as I am home for easter (I'm staying in my old room, above the boiler, in a small room, which generally heats up fast)
I left the computer on all night one night, and most of the day. While I was working it reached shutdown threshold (somewhere near 100 Degrees C) and shut down.
I turned it on when I got back, and it heated up amazingly fast - I turned it off, I left it off for 30mins, checked the copper block to see if it had cooled down - it had. Downclocked it to 2.2GHz, Turned it back on, heated up to shutdown threshold within minutes. It still did it after an hour of being left to it's own devices
Anyone got any ideas?
EDIT: I currently believe it's due to the fluid in the pipes not having cooled down enough. I'll leave it off for a long time, let it really cool down. Perhaps even bleed the system a bit too.
- Any other ideas to prevent this seemingly travel-caused problem?