Ok, I just ran doom 3 timedemo and got 39.5 fps, I had these settings:
High settings, 4 AA on res 1024x768
So I found this site : http://www.elitebastards.com/page.php?pageid=6201&head=1&comments=1
It has benchmarks from x800 PRO and it got 39.5 fps at the same settings.....
they used this machine:
- AMD AthlonXP 2500+
- 512Mb PC3500 DDR-RAM
- ABIT NF7-S v2.0 nForce 2 motherboard
- IBM 40Gb hard drive
- Pioneer 16x DVD-ROM
- 350W power supply
Ok I got the same score as they as you see and here are my spec:
1024 mb PC2700 ddr333 ram
x800 xt pe
3.06 Ghz P4
i845GE
Now how did that happen? I am using Cat 4.8
My first question is how do you check how many pipe lines your card has?
And can anyone explain me if possible why I got that much fps when I should get much more?
High settings, 4 AA on res 1024x768
So I found this site : http://www.elitebastards.com/page.php?pageid=6201&head=1&comments=1
It has benchmarks from x800 PRO and it got 39.5 fps at the same settings.....
they used this machine:
- AMD AthlonXP 2500+
- 512Mb PC3500 DDR-RAM
- ABIT NF7-S v2.0 nForce 2 motherboard
- IBM 40Gb hard drive
- Pioneer 16x DVD-ROM
- 350W power supply
Ok I got the same score as they as you see and here are my spec:
1024 mb PC2700 ddr333 ram
x800 xt pe
3.06 Ghz P4
i845GE
Now how did that happen? I am using Cat 4.8
My first question is how do you check how many pipe lines your card has?
And can anyone explain me if possible why I got that much fps when I should get much more?